EveryDrop EDR3RXD1 Refrigerator Water Filter 3

Replace your used refrigerator filter with the genuine EveryDrop EDR3RXD1 Refrigerator Water Filter 3. This Whirlpool OEM cartridge is designed for select refrigerators that use a push-button Filter 3 housing, normally located in the bottom front grille.

The EDR3RXD1 replaces several older Whirlpool, KitchenAid, Maytag, JennAir and Kenmore filter numbers, including 4396841, 4396710, W10193691, P1WB2 and P1WB2L. Check the part number printed on your existing cartridge or confirm your refrigerator model before ordering.

Why Choose the Genuine EveryDrop Filter 3?

The current EDR3RXD1 uses advanced Triple Filtration Technology powered by a renewable coconut-shell activated carbon core.

Water passes through three filtration stages:

1. Large-particle filtration

2. Medium-size micro-filtration

3. Targeted microscopic absorption

This process is designed to reduce specified substances that can affect the quality, taste and odor of refrigerator water and ice.

Certified to Reduce 74 Contaminants

The current genuine EveryDrop Filter 3 is certified to reduce 74 specified contaminants, including heavy metals, volatile organic compounds and 99% of microplastics. This is an updated performance claim; some older retailer pages still describe the filter as reducing 66 contaminants.

Contaminant-reduction claims apply only to the substances and percentages listed in the official performance data sheet.

NSF 42, 53 and 401 Certified

The EDR3RXD1 filtration system is tested and certified under three major NSF/ANSI standards:

• NSF/ANSI 42: Chlorine taste, odor and specified particulate reduction

• NSF/ANSI 53: Specified health-related contaminants, including lead, cysts, mercury and selected VOCs

• NSF/ANSI 401: Specified emerging contaminants, including microplastics and selected pharmaceutical and chemical compounds

The current performance data sheet and NSF listing confirm certification under NSF/ANSI Standards 42, 53 and 401.

Genuine Whirlpool OEM Refrigerator Filter

EveryDrop is Whirlpool Corporation’s official refrigerator water-filter brand. Filter 3 is developed for selected refrigerators from:

• Whirlpool

• KitchenAid

• Maytag

• Amana

• JennAir

• Select Kenmore refrigerators manufactured on compatible Whirlpool platforms

Compatibility depends on the refrigerator model and filter housing, not the appliance brand alone. EveryDrop Filter 1, Filter 2, Filter 3 and other numbered cartridges are not interchangeable.

EDR3RXD1 Replacement Part Numbers

The EveryDrop EDR3RXD1 commonly replaces or cross-references the following filter numbers:

• 4396841

• 4396841B

• 4396841P

• 4396841T

• 4396710

• 4396710B

• 4396710P

• 4396710T

• W10121145

• W10121146

• W10177635

• W10186667

• W10193691

• P1WB2

• P1WB2L

• P1RFWB2

• 46-9020

• 46-9030

• 46-9083

• 9020

• 9030

• Kenmore 9083

• KAD3RXD1

• WHR3RXD1

• EveryDrop Filter 3

DiscountFilters and FiltersFast list many of these as compatible or previous part numbers associated with Filter 3. Always verify compatibility using the refrigerator model or existing cartridge.

Filter Specifications

The current performance sheet and NSF listing rate the system for 200 gallons and approximately 0.5 gallons per minute.

How to Install EDR3RXD1 Filter 3

Filter 3 is generally installed in a push-button housing located in the refrigerator’s bottom front grille.

1. Locate the filter and release button in the bottom grille.

2. Press the release button completely.

3. Pull the old cartridge straight out.

4. Remove the reusable filter cap from the old cartridge when applicable.

5. Attach the cap to the new EDR3RXD1.

6. Align the new filter with the housing.

7. Push the cartridge into the opening until the release button pops back out.

8. Gently pull the filter cap to confirm that the cartridge is locked securely.

9. Reset the refrigerator’s filter-status light according to the appliance manual.

EveryDrop’s installation guidance describes pressing the eject button, removing and reattaching the filter cap, and pushing the new cartridge into the base grille until the button pops out.

Flush the Filter Before Drinking

After installation, flush approximately four gallons of water through the refrigerator dispenser.

Flushing helps:

• Remove air trapped in the water line

• Clear loose carbon particles from the new cartridge

• Stabilize the dispenser’s water flow

• Prepare the filter for normal use

Whirlpool recommends running four gallons of water through the line after replacing most EveryDrop refrigerator filters.

Temporary sputtering, cloudy water or an uneven stream immediately after installation is often caused by trapped air. Continue dispensing until the water appears clear and the flow becomes steady.

When Should EDR3RXD1 Be Replaced?

Replace EveryDrop Filter 3 every six months or 200 gallons, whichever comes first.

Earlier replacement may be needed when:

• The filter-status light turns red

• Water flow becomes slower

• Water develops an unusual taste or odor

• Ice begins to taste different

• The household uses a large amount of dispenser water

• The incoming water contains more sediment than usual

Whirlpool recommends replacing EveryDrop refrigerator filters every six months, although usage and water quality may require more frequent replacement.

Frequently Asked Questions

What is EDR3RXD1 Water Filter 3?

EDR3RXD1 is the genuine EveryDrop Filter 3 refrigerator water-filter cartridge. It is designed for selected refrigerators with a compatible push-button base-grille housing.

Does EDR3RXD1 replace 4396841?

Yes. EDR3RXD1 is the current EveryDrop Filter 3 replacement commonly used in place of the older Whirlpool 4396841 cartridge.

Is EDR3RXD1 the same as 4396710?

EDR3RXD1 is the current Filter 3 replacement commonly used for refrigerator systems that previously used Whirlpool 4396710.

How many contaminants does EveryDrop Filter 3 reduce?

The current EDR3RXD1 is certified to reduce 74 specified contaminants. Older product pages may still display the previous 66-contaminant claim.

Does EDR3RXD1 reduce microplastics?

Yes. EveryDrop states that the current Filter 3 is certified to reduce 99% of microplastics under the conditions listed in its official performance information.

Does EveryDrop Filter 3 reduce chlorine?

Yes. Its NSF/ANSI 42 certification includes reduction of chlorine taste and odor.

Does EDR3RXD1 reduce lead?

The genuine EDR3RXD1 system is certified under NSF/ANSI 53 for specified lead reduction.

Does EDR3RXD1 remove fluoride?

EDR3RXD1 is not specifically certified or marketed as a fluoride-reduction filter. Its certified claims apply only to the contaminants identified in its performance data sheet.

Where is EveryDrop Filter 3 located?

It is normally found in a push-button compartment in the bottom front grille of a compatible refrigerator. Check the appliance manual because filter locations can differ between refrigerator designs.

How much water should be flushed after installation?

Flush approximately four gallons of water through the dispenser after installing a new Filter 3 cartridge.

How long does EDR3RXD1 last?

It is rated for approximately six months or 200 gallons, whichever comes first.